Custom Products

This page shows a selection of custom-designed options made to meet very special needs. If you would like us to build something for you, contact customer service.

PDG Product Tool Kit

This kit contains a selection of tools needed to set-up and/or service any PDG wheelchair. The kit is available to any PDG Dealer or Service Technician at a fixed cost of $120 Canadian. Dealer discounts are not applicable when purchasing this item.

Recently added options - Spring 2011 - These options are not yet listed on individual product accessory pages

BENTLEY		Back to top

Contracture Front Rigging These front rigging can be mounted so that the footplates are located rearward of the casters.	Front Anti-Tippers	Disk Brakes


Frog Legs Big Rigs Casters	Foot Rest Padding (Front View)	Foot Rest Padding (Rear View)
FUZE T20		Back to top

PDG Plug-In Front Rigging	PDG Plug-In Front Rigging Close-up	Frog Legs Big Rigs Casters

Foot Rest Padding (Front View)	Foot Rest Padding (Rear View)
FUZE T50		Back to top

Custom Colors With a little extra lead time we can custom-paint the frame of your new wheelchair to whatever color you like. See the specification sheet for prices and delivery for this option	Fuze T50 - IV Pole An IV pole can be added to the frame, attached to the lower frame so it does not interfere with the tilt mechanism	Fuze T50 - Large Vent Tray This shows the large vent tray used for older-type vent systems that sit on this tray with the vent battery

Foot Rest Padding (Front View)	Foot Rest Padding (Rear View)


Fuze T50 - Small Vent Tray This shows the small vent tray used with the smaller vent systems that hang off the bracket shown on the back cane tubes.	Fuze T50 Power Tilt with Head switch This is a power-tilt modification to a Fuze T50. Total added weight is about 4Kg. We can provide the power tilt with a variety of switches as needed. Fuze T50 Power Tilt Manual	Foot Operated Swing Away Anti-tippers Allows quick and easy disengagement when tipping the chair back to go up over an obstacle.


Reclining Backrest With Gas Strut Support This infinitely reclining backrest includes gas struts to take the weight of the client's back as they recline. Activation triggers are located at the top of the backrest.	Reclining Backrest With Pin-Lock Support This reclining backrest can be set at up to three recline locations. Activation triggers are located near the top of the backrest.	Oxygen Tank Holder


Fuze T50 Hill-Holders We added these hill holders for someone who perhaps lives in San Francisco. Are there big hills in your neighborhood too?	Center Mount Contracture Front Rigging Font View	Center Mount Contracture Front Rigging Side View


Attendant Foot-Operated Brake Also Available for the Fuze T20 This shows the rear foot-operated mechanism in closed (brakes on) position.	Attendant Foot-Operated Brake Also Available for the Fuze T20 This shows the front mechanism in closed (brakes on) position.	Flip Down Abductor


Removable Frame Mount Gell Aductor


Cambered Rear Wheels Provides wider wheel base and improved access to hand-rims.	Frog Legs Big Rigs Casters	Disk Brake
STELLAR		Back to top

Stellar Vent Tray This is a large vent tray suitable to hold both the vent cabinet and a full size battery.	Anterior Tilt System	Stellar Power-tilt No Longer Available We previously offered a power-tilt option for the Stellar. This option is no longer available for this product. Power-tilt is available for the Fuze T50 only.


Disk Brakes	Frog Legs Big Rigs Casters

Foot Rest Padding (Front View)	Foot Rest Padding (Rear View)
OTHER		Back to top

Clear Lap Tray The clear lap tray slides on over most types of armrest pads. This tray comes with a cut-out section to allow room for the client's body. The tray fits most adult size wheelchairs to a maximum width of 20", depending on the chair type. Overall tray width is 23-1/2" x 21"